SyferLock Help Center

Adding a Network Interface to GridGuard Server

Setup

  1. Boot up Gridguard server
  2. Connect via SSH as gridadmin
  3. Execute command system-config-network

Edit Devices

Edit Devices

Choose option Edit Devices and hit Enter

Select Device

Select Device

Choose the eth1 NIC and click Enter

NIC Configuration

NIC Configuration
  1. Hit Space to clear out Use DHCP
  2. Enter Static IP
  3. Enter Netmask
  4. Leave Default gateway IP blank
  5. Click OK
  6. Click Save
  7. Click Save & Quit
  8. Execute command service network restart
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk